Maretron Submersible Pressure Transducer 03 PSI PTS03PSI02

Maretron

Maretron Submersible Pressure Transducer 0-3 PSI [PTS-0-3PSI-02]

Availability In stock

SKU TO-102517

Product Type NMEA Cables & Sensors

Brand Maretron

$589.00

Quantity:

Subtotal: $589.00

Add to Wish List

Description
Shipping + Returns Policy

Submersible Pressure Transducer 0-3 PSI

Maretron’s submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connect a submersible pressure transducer to an NMEA 2000® network via a Maretron FPM100 Fluid Pressure Monitor. Maretron recommends one of two methods for mounting a submersible pressure transducer in a tank: 1) without a restraining tube, and 2) with a restraining tube.

The submersible pressure transducers are designed for a tank with a 5-hole SAE J1810 fitting at the top. Install the mounting plate with cord grip onto the transducer cable, with the rounded hex section of the cord grip facing away from the transducer.

Lower the pressure transducer into the tank such that the transducer lies at the lowest point of the tank and tighten the cord grip to secure the cable. On a tank with a flat bottom, the transducer may slide from side to side with the motion of the vessel but will not rotate due to the stiffness of the cable. It is also possible to mount the pressure transducer inside a restraining or focus tube (sold separately, Maretron part number TFT-5H).

Pressure Transducer Mounting

Connect the two wires of the pressure transducer to a free pressure monitoring channel. Connect the red wire from the pressure transducer to the channel's positive (+) terminal and connect the black wire from the pressure transducer to the negative (-) terminal of the channel. The example in Figure 1 shows the pressure transducer connected to switch channel 0, with the white wire connected to "P0+" and the brown wire connected to "P0-." Submersible pressure transducers have a small plastic vent tube in the connecting cable.

Use a Maretron DSM Series Display (firmware 1.4.7 or higher) or a PC running Maretron’s N2KAnalyzer software (version 1.4.19 or higher) to configure the connected channel(s) on the FPM100.

Supply power to the NMEA 2000 network and verify that the pressure channel indicates a valid pressure reading.

Specifications:

Operating Range: 0 to 3 PSI (0.207 bar)
Depth Range (Water): 83.1” (2.11 m)
Depth Range Diesel (820 kg/m3): 101.3” (2.57 m)
Depth Range Gasoline/Petrol (750 kg/m3): 110.8” (2.81 m)
Cable Length: 17 ft (5.18 m)
Sensor Type: Gauge (Vent Tube)
Output: 4 – 20 mA current loop, loop powered
Excitation Voltage: 8 VDC to 28 VDC
Compatible Fluids / Gases: Diesel, Diesel Exhaust Fluid (DEF), Gasoline/Petrol, Hydraulic Fluid, Kerosene, Motor Oil, Fresh Water, Sea Water, Waste Water
Operating Temperature: 14 degrees F to 158 degrees F (-10 degrees C to 80 degrees C)
Storage Temperature: -4 degrees F to 176 degrees F (-20 degrees C to 80 degrees C)
Accuracy: ±0.3% Full Scale typ. at 25°C
Total Error Band (TEB): ±1.0% Full Scale typ. (-10 degrees C to 70 degrees C)
Non-Linearity, Hysteresis (NLH): ±0.2% Full-Scale typ. Best Straight Line (BSL) at 25°C
Temperature Compensation: 23 degrees F to 122 degrees F (0 degrees C to 50 degrees C)
Accuracy: ±1% Full Scale
Linearity: 0.5% Full Scale
Repeatability: 0.05% Full Scale
Full-Scale Thermal Error: 0.04% Full Scale/°F (0.07% Full Scale/degrees C)
Long-Term Stability: 0.2% Full Scale/year
Response Time: 150ms
Proof Pressure: 2 × Full Scale
Burst Pressure: 3 × Full Scale
Reverse Voltage Protection: ± 30V for 3 minutes
Construction: 316L stainless steel body and diaphragm, polyether polyurethane cable, chloroprene boot
EMC Compatibility: 10 Volts/meter per EN 61000-4-3
Weight: 24.8oz (703g)

Owner's Manual (pdf)

SHIPPING

Shipping Locations:
Canada - Timmins, ON
USA - Bayville, NJ & Tampa, FL
Orders will ship from the closest location with stock

Preferred shipping methods will be selected at the time of purchase by the customer. The selected method of shipping will be added to the purchase. The order will then be processed for delivery the same or next business day, depending on the time the order was placed. Shipping times vary on the method selected and shipping company. Shipping to Canada will be calculated accordingly and shipped with UPS.

Orders with any additional weight or large dimensions may be subject to Oversized Package Fees. Anchors, Trolling Motors, Fishing Rods, Marine Equipment, Riggers, Tents, for example will all see additional charges. For bulk orders please call 1-800-295-1389 (leave a Voicemail) or e-mail info@tackleoutdoors.com. Any orders that may require additional freight/ shipping charges will be charged accordingly.

FREE SHIPPING OFFERS AND DISCOUNT CODES

Free shipping codes when given out for specific products may not work if other items are in the cart of a customers order. These have been assigned to a certain product(s) and have been intended for single item purchases. Codes will be specific to product or product category/ collection and will work in accordance to that promotion or campaign. Contact us if you feel there is an error and we look over the order. Free Shipping offers are only valid in the US, unless the promotion states otherwise.

Shipping Discount Codes are only valid for the duration of any current promotions. We offer discount codes to our Canadian shoppers in replacement of free shipping offers only valid in the US. Discount codes will either be specific to a product(s) or include shipping discount for an entire order.

Any questions about shipping charges/ Canadian Shipping or items eligible for free shipping can be emailed to: info@tackleoutdoors.com

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

RETURNS POLICY

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

If there is an issue with your item/order, please contact us within 30 days of the original receipt. If the item is returned unopened in the original packaging, we will exchange it, offer you store credit, or offer you a refund based on your original method of payment. The product must be returned within 14 business days of the issuance of the credit or refund. All products must be packed in the original packaging, including any accessories, documentation and registration that shipped with the item.

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the time it takes us to process your return once we receive it, and the time it takes your bank to process our refund request (5 to 10 business days).

A 10% open box fee in addition to the 10% restocking fee is in effect on any sealed product that is opened or removed from its original packaging.
We do not permit the return of the following products, unless due to manufacturer defects:
• Special orders and products/ specifications
• Illumination devices, electronic sights, night vision equipment and any optics

PLEASE NOTE:
When selecting a carrier for your package that you insure the carrier offers shipment tracking to offer a safe return or declare the full value so that you are covered/ protected if the shipment is lost or damaged. The customer is responsible for the safe return of the item and any loss or damage during shipping while selecting a carrier.

You may also reach out to us at info@tackleoutdoors.com